A very versatile conveyor, the Model TA can be used in many types of material handling situations such as assembly line operations, sorting, packing, and inspection. Conveyor sets up quickly and easily to save on installation time.
Bed - 4 in. deep x 12 ga. formed steel slider bed - powder painted
Capacity - Maximum load per linear ft. of conveyor 75 lbs., not to exceed rated capacities
Reversible (with Center Drive)
ProSort 131 - High Speed Sortation
Shown with Optional Floor Supports
The ProSort 131 is designed for high speed sorting of products which may be too small to be sorted on conventional shoe sorters. Small fragile items or groups of items can be sorted with ease using the ProSort 131. Products are transported on high strength, anodized aluminum slats. At a predetermined location, divert shoes move diagonally across the conveyor to push the product onto a take-away line.
Overall Widths: 26", 32", 38", & 44"
Bed - 14" deep x 1-1/2", 12 ga. formed steel frame powder painted
Air Requirements - 60 p.s.i.
Motor - 230/460V-3Ph. 60HZ. HP based on speed and length requirements
Capacity - Maximum load 25 lbs. per foot. Maximum unit load 50 lbs.
Adjustable Floor Supports Available
SBI - Floor to Floor Slider Bed
Shown with Optional Floor Supports
The Model SBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily adjusted up to 30°. This conveyor can also be used as a booster conveyor in gravity flow systems.
Bed - 6-1/2" deep x 12 ga. formed steel frame powder painted. Standard sections come in lengths of 6', 8', & 10'
Motor - 1 HP C-Face "SSB" Series Brake Motor - 2 HP max.
Adjustable Floor Supports Available
Capacity-100 lbs. per linear foot.
Reversible
A - Aluminum Portable Narrow Belt
The Model A with its Roughtop belt easily moves boxes, cases, and cartons up inclines. Its narrow width allows it to be used in a stairway for floor-to-floor conveying. It can be propped on a shelf for stacking or order picking. The Model A can be stored on its end in a minimum amount of space.
Bed - 12" wide x .080 aluminum bed, 6061-T6 heat treated, reinforced
Capacity - 200 lbs. total distributed load, 120 lbs. unit load
Reversible
Switch - Reversing drum with power cord and plug mounted on side of unit
Speed Reduction - accomplished by 4-step jack shaft, V-belt, and #40 roller chain
Straight Gravity Skatewheel
Gravity Skatewheel conveyor is ideally used to convey lightweight packages or when operation requires lightweight sections. Skatewheel is useful in setting up temporary conveyor lines in warehousing activities, shipping departments, assembly areas, etc.
Overall Widths: 12", 15", 18", & 24"
Axles on 3" or 4" centers
Bed - 2-1/2" deep x 1" flange x 12 ga. formed steel powder painted, or 1/8" heat treated aluminum channel
1-15/16" O.D. steel or aluminum wheels
Couplings use bolts on one end, hooks on opposite end
Capacity - Maximum load per wheel 65 lbs. steel. 45 lbs. aluminum
