2-1/2” x 1” x 12 gage steel frame is rated at 38# per foot when supported on 10’ centers.
Roller Gravity 1-3/8” Diameter
Features
General warehouse applications, i.e. assembly line, shipping dept., etc
Lowest cost non-powered conveyor
Roller Size/Centers
1-3/8” dia roller with 18 gage steel tube, ¼” dia
Standard center distances are 3”, 4-1/2”, 6”, 9” or 12”centers
Rollers are rated at 50# each when open ball bearing are used.
Available in over all width of widths of 12”, 15”, 18” 24”.
Hook and rod or butt coupling available
2-1/2” x 1” x 12 gage frame is rated at 38# per foot when supported on 10’ centers
Roller Gravity 1.9 Diameter
Features
The 1.9” dia roller is the standard of the industry. They are used in high use production assembly lines and, shipping areas
Size/Centers
1.9” dia roller with16 gage steel tube, 7/16” hex shaft.
Standard roller centers are 3”, 4-1/2”, 6”, 9”, and 12”.
Rollers are rated at 240# each with open ball bearings. Ask about capacities of rollers with high speed bearings.
3-1/2” x 1-1/2” by 10 gage steel frame is rated at 135# per foot when supported on 10’ centers.
Roller Gravity Conveyor, 1.9 Diameter
Belt Driven Live Roller Transporting Conveyor
Features
Belt Driven live roller conveyors are used to transport product when cross transferring, diverting, hand loading or merging is required.
Note: Belt conveyors are the least expensive way to transport product.
Load Capacity/60 FPM
1.9” dia rollers on 3” centers are the standard of the industry. Others centers are available.
Conveyor is rated at 150# per foot live load. High speed quiet bearings are available.
Standard centers are 3”, 4-1/2”, 6” or 9”.
6-1/2” x 1-1/2” by 10 gage steel frame is standard.
Chain Driven Live Roller, 2.5 inch diameter
Applications
Wash down
Oily condition
Pallets
Drums
Extreme temperatures
Load Capacity/30 FPM
2-1/2” diameter roller with 12 gage steel tube, 11/16” hex shaft and sealed with lubricated ball bearing is rated at 630# live load. Ask about capacities of rollers with high speed bearings.
Roller centers are 4”, 5”, 6”,7-1/2”, 10” and 12”.
Frames are fabricated from ¼” pressed steel.
Maximum total loads to 21,000# at 30 FPM.
2-1/2“ Heavy Duty Chain Driven Zone Accumulating
Applications
This conveyor has the same specification as the 2.5” dia chain drive live roller.
Used for transporting and “O” pressure accumulation of heavy pallets and drums which require zero back pressure.
Load Capacity Chart/60 FPM
Standard speeds up to 30 FPM. Maximum 30 zones.
Accumulation is accomplished by means of roller triggers activating clutches on 36” to 72” standard zone lengths.
Zone capacity is 3,000# with the total conveyor load of 37,000#.
Line Shaft, Live Roller Spool Conveyor
Applications
Belt Driven live roller conveyors are used to transport product when cross transferring, diverting, hand loading or merging is required
Low Pressure accumulation
Clean rooms
Economical
Load Capacity/60 FPM
1.9” dia roller with 16 gage tube.
7/16” Hex shaft and open ball veering is standard
Conveyor is rated at 60# per foot with rollers on 3” centers Ask about rollers with high speed quiet bearing.
Standard center are 3”, 6”, or 9”
6-1/2” x 1-1/2” by 10 gage steel frame is standard.
