Actionpac - All-Packaging Machine -Ambrose/Packleader - AIE - Artypac - Audion Automation - Bunn Co. - Bedford Ind. - Ben Clements Tachit Beseler Corp. - Bestpack Burford Corp. - Clamco - Dynaric, Inc. - Extend - Felins - ID Technology - Litt Packaging - Loveshaw/Little David - Okura - Orion - Packaging Aids Corp. - Plas-Ties Corp. - Polychem - Preferred Pack - Shrink Tech - Signode Corp. - Storopack - Strapack - Streamfeeder - Transpak

Click For Blowout Specials

 

Machines / Systems

 

 

 

Click to Watch Us On Heartbeat of America

For All Your Packaging Needs

Sales / Service / Supplies

Call: (626) 966-3526

Cousins Semi-Automatic

550 PUP SERIES Features and Specifications
Production Speed:   1-15 loads per hour
NOTE: Process rates will vary with load size; number of
wraps & forklift load/unload time
Load Capacity:   Maximum load weight: 3,000# dynamic – 8,000# static
  Maximum load size: 48” W x 48” L x 75” H (68” Max.
   load diagonal)
NOTE: Maximum load size shown is the largest load
PUP will wrap – no exceptions
Turntable:   57” Diameter 5/16” thick laser-cut steel plate
  18 point turntable support system
  Turntable height 2-1/4” from floor
  ANSI # 50 Direct Chain Drive c/w chain tensioner
  1 - 9 RPM rotational speed c/w soft start acceleration
  1/3 HP VDC variable speed gear-motor
  Safety surround ring encloses turntable
Film Carriage Elevator:   1/8 HP VDC variable speed gear-motor
  Direct flat belt drive system
  4 point “V” wheel carriage guidance system with side
    thrust rollers
Control Features:   Simple to operate
  Power On / Emergency Stop Button
  Turntable Jog / Run Switch
  Film Carriage Lower / Raise Switch
  Film Carriage Variable Speed Control
  Turntable Variable Speed Control
  Non-proprietary UL/CSA approved components
Structural Features:   Formed steel base construction
  Formed steel metal tower
  Forklift truck portable base design – pick-up angles
   included
Electrical Requirement:
   115 Volts 1 Phase 60 Hz 10 Amps

LP 1100X SERIES Features and Specifications
Production Speed:   1-30 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity:   Maximum load weight: 4,000# dynamic – 17,000# static
  Maximum load size: 50” W x 50” L x 87” H (71” Max.
   load diagonal)
Turntable:   57” Diameter Laser-cut steel plate with surround deck
   protection - 3/8” thick
  Maintenance free - 36 roller bearing support system
  Turntable height 2.938” from floor
  ANSI # 50 Direct Chain Drive c/w Chain tensioner
  3-15 RPM rotational speed c/w soft start acceleration
  1/2 HP DC Drive Motor
  Final Revolution Deceleration and positive stop alignment
  Rugged surround deck for added protection, 3 sided
   loading and pit mounting
  Front and back forklift ports for easy movement
  Accu-Count exact turntable positioning system for
   additional film savings!
Film Carriage Elevator:   1/2 HP DC variable speed motor
  ANSI #40 direct chain drive c/w shock dampener
  Maintenance free 12 point carriage guidance system
Film Delivery System:   Electro-Magnetic Web Tensioning System
  Standard 20” roll width, 10” diameter
  Carriage descent obstruction shut-off device for additional
   safety
  Side mounted film carriage for operator convenience and
   safety
Film Capacity:   Accepts all commercial films wound on 3” diameter cores
   x 20” width
  Accommodates damaged cores
Control Features:   Simple to operate
  PANASONIC PLC
  Power Off –On – Reset Switch & Power On Indicator
   Light
  Single button Auto Wrap Cycle Start/Pause
  Cycle pause for applying top sheets
  Base or top wraps first program
  Reinforce wrap control for mid-wrapping
  Up only or up/down wrap program
  Emergency Stop Button
  Turntable Jog Switch
  Film Carriage Lower/Raise Switch
  Film Tension (Force-to-Load) Control
  Separate Film Carriage Raise & Lower Speed Controls
  Variable Turntable Speed Control
  Automatic Load Height Detection Sensor
  Separate 1 to 9 Revolution Top & Bottom Wrap Control
  NEMA 12 Enclosure
  Non-proprietary UL/CSA approved components
Structural Features:   All structural steel construction
  Forklift truck portable base structure design – lifting tubes
   included for front and rear access
  Structural steel H-beam machine tower
  Electro-static powder coated paint finish
Electrical Requirement:
   115 Volts 1 Phase 60 Hz 15 Amps

LP 2100X SERIES Features and Specifications
Production Speed:   1-30 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of
wraps & forklift load/unload time
Load Capacity:   Maximum load weight: 4,000# dynamic – 17,000# static
  Maximum load size: 50” W x 50” L x 87” H (71” Max.
   load diagonal)
Turntable:   57” Diameter Laser-cut steel plate with surround deck
   protection - 3/8” thick
  Maintenance free - 36 roller bearing support system
  Turntable height 2.938” from floor
  ANSI # 50 Direct Chain Drive c/w Chain tensioner
  3-15 RPM rotational speed c/w soft start acceleration
  1/2 HP DC Drive Motor
  Final Revolution Deceleration and positive stop alignment
  Rugged surround deck for added protection, 3 sided
   loading and pit mounting
  Front and back forklift ports for easy movement
  Accu-Count exact turntable positioning system for
   additional film savings!
Film Carriage Elevator:   1/2 HP DC variable speed motor
  ANSI #40 direct chain drive c/w shock dampeners
  Maintenance free 12 point carriage guidance system
Film Delivery System:   Rapid Thread™ 20” capacity pre-stretch film carriage
  1/2 HP DC variable speed motor
  Fully electronic dynamic dancer corner compensation
  33 to 313% fixed stretch capability
  Pre-stretch ratio variable by easy sprocket change
  Rapid Thread™ (Safety Door) with auto power cut-off
   switch
  Carriage descent obstruction shut-off device for additional
   safety
  Side mounted film carriage for operator convenience and
   safety
Control Features:   Simple to Operate
  PANASONIC PLC
  Power Off –On – Reset Switch & Power On Indicator
   Light
  Single button Auto Wrap Cycle Start/Pause
  Cycle pause for applying top sheets
  Base or top wraps first program
  Reinforce wrap control for mid-wrapping
  Up only or up/down wrap program
  Emergency Stop Button
  Turntable Jog Switch
  Film Carriage Lower/Raise Switch
  Film Tension (Force-to-Load) Control
  Separate Film Carriage Raise & Lower Speed Controls
  Variable Turntable Speed Control
  Automatic Load Height Detection Sensor
  Separate 1 to 9 Revolution Top & Bottom Wrap Control
  NEMA 12 Enclosure
  Non-proprietary UL/CSA approved components
Structural Features:   All structural steel construction
  Forklift truck portable base structure design – lifting tubes
   included for front and rear access
  Structural steel H-beam machine tower
  Electro-static powder coated paint finish
Electrical Requirement:
   115 Volts 1 Phase 60 Hz 15 Amps

MX LP SERIES Features and Specifications
Production Speed:   1-30 loads per hour (Single Turntable)
NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity:   Maximum load weight: 5,000# dynamic – 17,000# static
  Maximum load size: 50” W x 50” L x 88” H (71” Max.
   load diagonal)
Turntable:   57” Diameter Laser-cut steel plate with surround deck
   protection - 3/8” thick
  Maintenance free - 36 roller bearing support system
  Turntable height 2.938” from floor
  ANSI # 50 Direct Chain Drive c/w Chain tensioner
  3-15 RPM rotational speed c/w soft start acceleration
  3/4 HP DC Drive Motor
  Final Revolution Deceleration and positive stop alignment
  Rugged surround deck for added protection, 3 sided
   loading and pit mounting
  Front & back forklift ports for easy movement
  Accu-Count exact turntable positioning system for
   additional film savings!
Film Carriage Elevator:   1/2 HP DC variable speed motor
  Belt/Pulley with Anti-Fall Device
  Maintenance free 12 point carriage guidance system
Film Delivery System:   Rapid Thread™ 20” capacity pre-stretch film carriage
  1/2 HP DC variable speed motor
  Fully electronic dynamic dancer corner compensation
  33 to 313% fixed stretch capability
  Pre-stretch ratio variable by easy sprocket change
  Rapid Thread™ (Safety Door) with auto power cut-off
   switch
  Carriage descent obstruction shut-off device for additional
   safety
  Side mounted film carriage for operator convenience and
   safety
Control Features:   Simple to operate
  PANASONIC PLC with Touchscreen Operator Interface
  Power Off – On – Reset Switch & Power On Indicator
   Light
  Single button Auto Wrap Cycle Start/Pause
  Cycle Pause for applying top sheets
  Base or top wraps first wrap program
  Reinforce wrap control for mid-wrapping
  Up only or up/down wrap program
  Emergency Stop Button
  Turntable Jog Button
  Film Carriage Lower/Raise Buttons
  Film Tension (Force-to-Load) Control
  Separate Film Carriage Raise & Lower Speed Controls
  Variable Turntable Speed Control
  Triple Beam Automatic Load Height Detection Sensor for
   dark or shiny loads
  Separate 1 to 12 Revolution Top & Bottom Wrap Control
  NEMA 12 Enclosure
  Non-proprietary UL/CSA approved components
Structural Features:   All structural steel construction
  Forklift truck portable base structure design – lifting tubes
   included for front and rear access
  Structural steel tube machine tower c/w sheet metal
   covers
  Electro-static powder coated paint finish
Electrical Requirement:
   115 Volts 1 Phase 60 Hz 20 Amps